|
|
|
|
|
07-03-2015, 07:44 PM
|
#1 | ||
|
Starter Motor
Join Date: Feb 2015
Posts: 4
|
Chaps,
My first post, thanks for letting me tag along. I'm considering popping in a toyota T50 gearbox in a mk. II ford escort panel van running a 1600 crossflow. How involved is the process? I've tried finding links on the forum but have come up short. All advice gratefully accepted. Cheers. |
||
|
|
|
07-03-2015, 09:56 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Apr 2012
Location: Taromeo
Posts: 10,674
|
Bell housing, clutch plate, pressure plate, modified thrust bearing, speedo cable, modified cross member should be about it.
Someone probably sells it all. |
||
|
|
|
| This user likes this post: |
|
07-03-2015, 11:31 PM
|
#3 | ||
|
Starter Motor
Join Date: Feb 2015
Posts: 4
|
Mighty obliged to you!
Cheers. |
||
|
|
|
|
09-03-2015, 09:01 AM
|
#4 | ||
|
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
post back what starter motor you used
__________________
My car goes Brumm Brumm |
||
|
|
|
|
09-03-2015, 10:21 AM
|
#5 | ||
|
Starter Motor
Join Date: Feb 2015
Posts: 4
|
I'll let you know...once I pick up the car. I've just recently bought the panel van and I'm a little green behind the ears about it all. So, I'm doing my research.
I'll let you know once I go get her. |
||
|
|
|
|
09-03-2015, 07:03 PM
|
#6 | ||
|
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
one like this ?
they have got a stupid lower ball joint arm type thingy with a bush 
__________________
My car goes Brumm Brumm Last edited by dirty hands; 09-03-2015 at 07:11 PM. |
||
|
|
|
|
09-03-2015, 07:53 PM
|
#7 | ||
|
Starter Motor
Join Date: Feb 2015
Posts: 4
|
That be the one, but I got windows along the side. '81 model.
So, do you think it's worth effort? |
||
|
|
|
|
09-03-2015, 09:51 PM
|
#8 | ||
|
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
yes ..do a lot of research about this power train set up you like
these escorts did have a 2 ltr motor fitted the diffs are very good 1600 cross flow a grunt motor with a 4 speed box its still ok still looking at this question of the T50 http://www.gearboxconversion.com/Toyota_T50.html with the T50 box you might need a custom drive shaft built .... not sure myself . you might want a brake upgrade later . .only drums at the back small disc at the front and struts set up
__________________
My car goes Brumm Brumm Last edited by dirty hands; 09-03-2015 at 10:09 PM. |
||
|
|
|
Toyota T50
Linear Mode
