|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
15-09-2016, 03:22 PM
|
#1 | ||
|
"Flooded it mate?"
Join Date: Apr 2011
Location: Busselton, Western Australia
Posts: 3,196
|
G'day all.
I've got a cluster from an AU1 wagon... that's I'd like to be able to power on, so I know how many kms are on the odo. Anyone know how? I've tried looking at schematics but couldn't work it out Thanks! |
||
|
|
|
15-09-2016, 03:49 PM
|
#2 | |||
|
You can't stop the signal
Join Date: Nov 2005
Location: Behind a computer at work
Posts: 1,624
|
Haven't tried, but workshop manual on here says:
J2 pin 1 = Power Ground J2 pin 20 = Battery I'll see if I can try tonight. Got on old low series clusters that is no loss of it goes pop
__________________
Quote:
|
|||
|
|
|
|
18-09-2016, 10:22 AM
|
#3 | ||
|
2002 XR6 VCT Owner
Join Date: Mar 2011
Location: Sydney
Posts: 51
|
I also have a cluster I have been wanting to power on to verify the KM's on it.
I can locate the connector as their is only one 20 pin connector. But which Pin is Pin 1 and which is Pin 20. There are no numbers on the plastic connector to indicate where Pin 1 is.
__________________
SOLD: 2002 AU3 Falcon XR6 VCT on Impco Mixer Gas Factory Leather and Towbar Stock 17' rims Perfect After Fixing Myself Air Hog Air Filter + 2.5 Inch Sterling Mandrel Bent Exhaust + Supercheap Oval Tip. Carbon Fibre Style Vinyl Wrapped Roof and Boot |
||
|
|
|
|
19-09-2016, 12:23 AM
|
#4 | |||
|
You can't stop the signal
Join Date: Nov 2005
Location: Behind a computer at work
Posts: 1,624
|
So just the J2 connector needs to be connected to read km's.
My preference would be the swap clusters on a car given how easy it is to do. The pin out diagrams are in the workshop manual, which is on here under tech resources. For series 2 clusters you need to connect: J2 pin 1 - Power ground J2 pin 2 - Signal ground J2 pin 20 - Battery For Series 1 this does not work, due to the cluster needing to be on with ignition to read km's. Connecting in J2 pin 4 - ignition, didn't work. So ill try to do some more diagnosing this week
__________________
Quote:
|
|||
|
|
|
|
19-09-2016, 12:13 PM
|
#5 | ||
|
Spanner Thrower
Join Date: Oct 2013
Location: Parramatta
Posts: 296
|
Id wager a guess at J2, pin 19, but its 8.2v. If i knew where my old cluster was id try it.
Use a 9v battery on j2 p2 (ground/neg) and j2 p19 (postive).
__________________
1999 AU Futura Wagon (Nickname Betsie the Barge-***) Current Mods: Fairmont Cluster, LED's Changed to Purple, Lukey Competition Extractors, 2.5" Hi flow Cat, Hi-Stall Converter, ED Box with FG internals, AUIII VCT Fuel Rail + Injectors, F6 Fuel Regulator, Stereo upgrade, Aftermarket LPG. Awaiting Wife Approval Mods: TE50 Front Bar, AU Tickford/SR Interior, Roof Racks, Slimline Weathershields, 2.5" Cat Back Exhaust, 27mm Front Sway Bar, Other Shiny things! |
||
|
|
|
|
19-09-2016, 12:58 PM
|
#6 | |||
|
You can't stop the signal
Join Date: Nov 2005
Location: Behind a computer at work
Posts: 1,624
|
J2 Pin 19 is 8.2v out, to the spedo transducer
__________________
Quote:
|
|||
|
|
|
|
19-09-2016, 10:33 PM
|
#7 | ||
|
Spanner Thrower
Join Date: Oct 2013
Location: Parramatta
Posts: 296
|
Ah ok. I could see 8.2v but wasnt saying where it was coming from/ going to.
Wait, isnt P17 to the transducer?
__________________
1999 AU Futura Wagon (Nickname Betsie the Barge-***) Current Mods: Fairmont Cluster, LED's Changed to Purple, Lukey Competition Extractors, 2.5" Hi flow Cat, Hi-Stall Converter, ED Box with FG internals, AUIII VCT Fuel Rail + Injectors, F6 Fuel Regulator, Stereo upgrade, Aftermarket LPG. Awaiting Wife Approval Mods: TE50 Front Bar, AU Tickford/SR Interior, Roof Racks, Slimline Weathershields, 2.5" Cat Back Exhaust, 27mm Front Sway Bar, Other Shiny things! |
||
|
|
|
|
19-09-2016, 11:16 PM
|
#8 | |||
|
You can't stop the signal
Join Date: Nov 2005
Location: Behind a computer at work
Posts: 1,624
|
Pin 17 is speed input from the transducer.
Spedo transducer is standard 3 pin sensor. Power and Ground go in, signal comes out. All of these come from/to the cluster Then you also have speed out from cluster to ECU (pin 18)
__________________
Quote:
|
|||
|
|
|
| This user likes this post: |
|
20-09-2016, 03:29 PM
|
#9 | ||
|
Spanner Thrower
Join Date: Oct 2013
Location: Parramatta
Posts: 296
|
Good thing I'm still looking for my cluster and didnt use a 9v on it yet then.
Id highly doubt its pulking power from the parkers, i have an s3 cluster in my s1, but im fairly certain the odometer turns off with the key out. Cant think of many wires it could be on though
__________________
1999 AU Futura Wagon (Nickname Betsie the Barge-***) Current Mods: Fairmont Cluster, LED's Changed to Purple, Lukey Competition Extractors, 2.5" Hi flow Cat, Hi-Stall Converter, ED Box with FG internals, AUIII VCT Fuel Rail + Injectors, F6 Fuel Regulator, Stereo upgrade, Aftermarket LPG. Awaiting Wife Approval Mods: TE50 Front Bar, AU Tickford/SR Interior, Roof Racks, Slimline Weathershields, 2.5" Cat Back Exhaust, 27mm Front Sway Bar, Other Shiny things! |
||
|
|
|
AU Cluster, how to Power On?
Linear Mode
