BA BF C5 325mm Brake Kits cheap

[NCII40]

Originally Posted by FLOORED

The offset of the disc is also different from the two rotors . The C5 BA Ford GT or PBR optioned kits are better as the caliper is also more rigid.
325 x 32 C5 Disc
322 x 28 XR6T XR8 disc

here are some pics for comparison

[NCII40]

Looks like they made a return


Hopefully the bolt holes line up


i will buy a set for trial

[FLOORED]

Originally Posted by NCII40

Looks like they made a return


Hopefully the bolt holes line up


i will buy a set for trial




image







image
image

The bolt holes and offset won't line up because they are for a Chev and not a Ford. The caliper cradle (some call it a bracket) is different for each car eg HSV , FORD and Chev along with the Toyota they fitted them too.
Wjhat we may be able to do is use them for the 355mm kits we used to do back in the day if they fit the 32mm disc.

[NCII40]

Originally Posted by FLOORED

The bolt holes and offset won't line up because they are for a Chev and not a Ford. The caliper cradle (some call it a bracket) is different for each car eg HSV , FORD and Chev along with the Toyota they fitted them too.
Wjhat we may be able to do is use them for the 355mm kits we used to do back in the day if they fit the 32mm disc.

Lets do this !

[FLOORED]

Originally Posted by NCII40

Lets do this !

When you get them you can send a pair to me and we will have a look.

[NCII40]

Thanks Matt


Update, It's Powerstop that are making them





Power Stop calipers and the brackets are remanufactured in our Chicago, IL facility


Power Stop calipers are 100% pressure tested to verify piston operation and prevent any possible leaks from occurring. This insures that every caliper is inspected for quality and safety. Every caliper kit is expertly assembled using new pistons, seals, slide pins (where applicable), dust boots, bleeder screws, and stainless steel brake pad abutment clips. High temperature EPDM rubber dust boots and premium silicone lubricant.

[FLOORED]

Originally Posted by NCII40

Thanks Matt


Update, It's Powerstop that are making them


image


Power Stop calipers and the brackets are remanufactured in our Chicago, IL facility


Power Stop calipers are 100% pressure tested to verify piston operation and prevent any possible leaks from occurring. This insures that every caliper is inspected for quality and safety. Every caliper kit is expertly assembled using new pistons, seals, slide pins (where applicable), dust boots, bleeder screws, and stainless steel brake pad abutment clips. High temperature EPDM rubber dust boots and premium silicone lubricant.

Did you get them at all ?