![]() |
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 | ||
Regular Member
Join Date: May 2005
Location: South West NSW
Posts: 47
|
G'day all,
I got a mate with a KC laser with the 1.6 carby enigine, which is running bit rough, I want to check the timing but am unsure of where it is meant to be set, it also idles up a bit high i feel on the choke, (higher than i think it should) is there an adjustment for the auto choke on it Cheers |
||
![]() |
![]() ![]() |
![]() |
#2 | ||
Chairman & Administrator
![]() ![]() Join Date: Dec 2004
Location: 1975
Posts: 107,006
|
Timing according to my Relim chart is 2 degrees BTDC +/- 1 Deg with the vacuum hose disconnected. Idle speed should be 800-900 for the manual and 900-1050 for the auto.
Cheers Russ
__________________
Observatio Facta Rotae
|
||
![]() |
![]() ![]() |