|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
21-06-2016, 02:04 PM | #1 | ||
FF.Com.Au Hardcore
Join Date: Oct 2005
Location: Auckland, NZ
Posts: 1,266
|
I've bought a set of rear pads (Remsa Ultra ceramic) and had a look online for tips on replacing the pads. I'm not planning to replace the discs as they are well above the minimum thickness.
But it seems that it can be something of a mission to get the calliper off, as the piston can't be pushed straight into the calliper and the pads can get stuck on the lip on the outside of the disc. If you have replaced the rear pads, how much of an issue is this? And can anyone recommend a good tool to retract the piston? I had a Stanley tool, which was OK, but was stolen with my tools when some low life scum burgled our house a couple of years ago.
__________________
MB Mondeo TDCi wagon, sea grey, on MAK Invidia 16" wheels. |
||