|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
|
|
Thread Tools | Display Modes |
28-02-2024, 05:46 PM
|
#1 | ||
|
Starter Motor
Join Date: Feb 2024
Posts: 4
|
Hi.*
2014 Ford Focus TDCi 2.0l Hatchback. I live in Australia. I recently did a Sync 1 to 3 conversion. Everything is working perfectly except my reverse camera which intermittently works and when it does the image is grainy. It worked perfectly on the original *4” screen.* I ordered a 2016 camera to test as the APIM/ACM was pulled from a 2016 wreck and it loads ok but it is black and white. I’ve reinstalled the original camera again until I can work it out.* If someone can tell me how to get the Mk3.5 to show in colour I’ll reinstall it and make mounting adjustments to the MK3 bracket. I’ve heard about running a LIN calibration or a reverse camera calibration but I can’t find where in ForScan to do either of these. They aren’t in my BCMii module.* I do have firmware updates available but want to do that as a last resort.*I don’t have the paid version of ForScan only the 2 month trial so I need to upgrade to do the firmware updates. |
||
|
|
Reverse camera after Sync 3 upgrade
Threaded Mode