|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
17-10-2008, 01:27 PM
|
#1 | ||
|
Regular Member
Join Date: Aug 2007
Posts: 108
|
How do you remove the inhibitor switch on the AU Transmissions? I can get the 2 wiring plugs off and the 2 8mm bolts.
But can work out how to get the switch itself off. Any suggestions? I dont want to break it.. |
||
|
|
|
17-10-2008, 10:36 PM
|
#2 | ||
|
Donating Member
 Join Date: Dec 2006
Posts: 5,444
|
They often rust on, if the bolts are out it slides off
I have had to smash them off in the past, clean up and regrease the shaft when replacing. |
||
|
|
|
| This user likes this post: |
|
18-10-2008, 10:55 AM
|
#3 | |||
|
Custom e-series owner
Join Date: Feb 2006
Location: wodonga vic
Posts: 840
|
Quote:
if you have taken wire /bolts all off it should just slide off..
__________________
88 ea falcon fresh paint, 20 inch chrome wheels, ed xr front, scorcher body kit, ef/el mirrors and door trims, UPC 330mm twin piston big brakes, manual, front adjustable coil overs, 2.5 inch exhaust, twin thermos etc etc **atomic built 660kw AU engine being fitted**
|
|||
|
|
|
|
19-10-2008, 11:26 AM
|
#4 | ||
|
FF.Com.Au Hardcore
Join Date: Jan 2005
Posts: 5,165
|
Have moved this thread to the AU Falcon area as it relates to this club more that OzECruisers.
|
||
|
|
|
|
19-10-2008, 04:34 PM
|
#5 | ||
|
64 Deluxe 4 door
 
Join Date: Jun 2007
Location: Raxacoricofallapatorius
Posts: 10,213
|
When you put a new switch on make sure the shaft is smooth & rust free. I did mine once and putting the new switch on I pushed the shaft inside the gearbox a tiny bit. result was I only had reverse, no drive
__________________
XM Deluxe FG XR50 BA Pursuit Ute |
||
|
|
|
|
20-10-2008, 03:57 PM
|
#6 | ||
|
Regular Member
Join Date: Aug 2007
Posts: 108
|
I had to break the inhibitor switch off.. it was rusted like all to the shaft.. so i grabbed a screw driver and used that to clean up the shaft (gently) then i got sand paper and sanded it back a few times till the new switch slide on just nice..
Hopefully this fixes the problem.. I will report back.. Thanks for every ones help Jason |
||
|
|
|
How To Remove Inhibitor Switch
Linear Mode
