|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
26-05-2014, 06:52 PM
|
#1 | ||
|
Starter Motor
Join Date: Dec 2009
Posts: 13
|
Hey guys,
I'm wiring a mates speedway car at the moment and we seem to have hit a wall trying to get the car to start. It's turning over beautifully but has no spark and the injectors aren't firing. Obviously being a racecar we've left a few things off like dash, BEM, etc. And done a manual conversion. Because the motor is stock and I had a spare tiperformance chip laying around I used one of their basic manual tunes from their website and only disabled smartlock. Any ideas what i might have to do/fix to get things going? For some reason there is also an extra wire coming out of the loom in the same place where, what I think is a knock sensor on the side of cylinder 3 or 4, comes out. Any ideas what this RED wire should be connected to? I'll learn how to post a picture in the next few days and put one up. I'm heading back around to his place on Friday so any suggestions for me to try would be hugely appreciated. I think there will either be celebratory drinks or a bonfire and drowning of sorrows by the end of the weekend |
||
|
|
Au speedway car headaches!
Linear Mode
