|
26-12-2009, 11:48 PM | #1 | ||
FF.Com.Au Hardcore
Join Date: Feb 2006
Location: Toowoomba
Posts: 2,634
|
what have people done with electronic ignition for 1300/1600 kent motors?... is there a kit? or a trick?
__________________
1628 Escort Project Thread 67.3 RWHP - Paramount Performance Dyno DJ Automotive Tuned with proper jets http://fordforums.com.au/showthread....4&page=1&pp=25 |
||
27-12-2009, 12:34 AM | #2 | ||
Regular Member
Join Date: May 2006
Posts: 72
|
Hi,
I'm not sure about the Kent motors Specificly, however i've used a Pertonix Ignitor Kit on my Corty before i went to a Crane Cams Hi-6 and was very impressed with it it uses a magnetic pick up so there's no contact or light diodes, it was really easy to set up and the best thing was no more points or timing adjustment =D. This is there website: http://www.pertronix.com.au/ I think there about 120ish last time i checked, The best thing is that you just fit it to your existing distributor and thats it, there's only 1 extra wire that connects to the Positive on your coil so it takes about 20minutes to install it all and tune it up. Hope this helped Cheers Jason
__________________
Current Project: Rebuilding my Corty! 220kw Au3 XR8 Engine, full Custom Zorst, EMS Computer, Underdrive pulleys and MSD coil Parks. TKO Tremec 5 Speed Full Floater 9in 31 Spine with locker Its almost there!!!! |
||
27-12-2009, 12:23 PM | #3 | ||
Regular Member
Join Date: Apr 2009
Posts: 121
|
Good link there as Aldon was the distributor until they folded. The systems are the same - just a different name. I have an Aldon ignitor in the Mini and it is the bees knees(driving through driving rain, no dizzy shroud and not a hint of water shorts...it just keeps on going)
Pertronix will be a good choice... |
||
29-12-2009, 04:18 PM | #4 | |||
V8's for ever
Join Date: Aug 2005
Posts: 808
|
Quote:
|
|||