![]() |
|
![]() |
#1 | ||
problem king
Join Date: Jun 2007
Posts: 15
|
Hey all, Ford Laser TX3 Turbo FWD KF 1990....
I turn a corner, and the car wont rev? it jerks I flat foot in 2nd gear on a straight, and the car revs up but cuts out as the revs are increasing im running 12psi, my g-reddy boost controller screen shows the boost is dropping when the car jerks... im curious it may be fuel pressure problems ( due to me turning it cuts out, used to be only when under 1/4 a tank, now it does it at 1/2 tank, and the car idles like crap ) , whats the pressure meant to be? ill wack a guage on it this weekend so see if the pressure drops as i turn a corner to source the problem & check it @ idle..... cheers, any other thoughts will be appreciated... ![]() |
||
![]() |
![]() ![]() |
![]() |
#2 | ||
New Ford Owner
Join Date: Dec 2005
Location: Perth W.A
Posts: 37
|
Does the Boost cut buzzer sound??
Is it a Standard Turbo? or have you done the VF10 hybrid? 14psi is maximum you can run on a std ecu, so it may just be Overboosting and cutting out? more info required |
||
![]() |
![]() ![]() |
![]() |
#3 | ||
problem king
Join Date: Jun 2007
Posts: 15
|
put a fuel guage on it, drove around the corner dropped to 9psi, i put a new fuel pump, she runs better than ever
![]() |
||
![]() |
![]() ![]() |
![]() |
#4 | ||
New Ford Owner
Join Date: Dec 2005
Location: Perth W.A
Posts: 37
|
nice work, Now look for a cheap vf10 to hybrid it!
|
||
![]() |
![]() ![]() |