|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
22-02-2009, 10:35 PM
|
#1 | ||
|
Tyre Shredn
Join Date: May 2007
Location: hillside
Posts: 162
|
hey guys im putting on a snort kit now with the plenum
 but it obstructs this little doo dad.  this controls all these butterfly valves but wtf do they do???  wat would the effects be if i removed the butterflys all together???and the doo dad also |
||
|
|
|
22-02-2009, 10:45 PM
|
#2 | ||
|
www.TUFFCARPARTS.com
Join Date: Feb 2006
Posts: 5,221
|
They're the butterflies for the short/long runners in the BBM and I believe that doo dad thingy is the actuator for them.
Being turbo, I'd be gutting the BBM and removing that stuff while you've got it apart. |
||
|
|
|
|
23-02-2009, 05:45 PM
|
#3 | ||
|
Tyre Shredn
Join Date: May 2007
Location: hillside
Posts: 162
|
do all the butterflies work like a choke? i dont know what they do.
if i remove them will be a to start when cold and run crap until up to temp??? |
||
|
|
|
|
23-02-2009, 06:55 PM
|
#4 | ||
|
www.TUFFCARPARTS.com
Join Date: Feb 2006
Posts: 5,221
|
No. Butterflies are used to switch between the runners in the manifold. Long runners at low rpm for torque, then IIRC they switch over to the short runners for more top end power at roughly 3800rpm.
|
||
|
|
|
|
23-02-2009, 08:06 PM
|
#5 | ||
|
Tyre Shredn
Join Date: May 2007
Location: hillside
Posts: 162
|
ohhh k thanks for that its gud to know
|
||
|
|
|
|
23-02-2009, 08:27 PM
|
#6 | ||
|
www.TUFFCARPARTS.com
Join Date: Feb 2006
Posts: 5,221
|
No probs! I wanna gut mine if it's not already! Hopefully it's easy to do.
|
||
|
|
|
|
23-02-2009, 08:31 PM
|
#7 | |||
|
Back to Le Frenchy
Join Date: Feb 2005
Location: Back home.....
Posts: 13,346
|
Yep, with a turbo they are pretty much pointless. Remove them and do a little porting while you are there.
__________________
Quote:
07 Renault Sport Megane F1 Team R26 #1397
|
|||
|
|
|
|
25-02-2009, 11:44 AM
|
#8 | ||||
|
ORSM FORD CRUSIERS
Join Date: Apr 2005
Location: ELTHAM
Posts: 2,297
|
Quote:
yep I allready have done it justin! Quote:
As for your other thread about changing injectors... a couple of questions. 1. Are you running a aftermarket ecu?? 2. Are you running a rise of rate FMU (fuel regulator). If you are not running a after market ecu the stock computer can't handle bigger injectors without a flash tunner even then the capabilitys are very limited. Also you can run a max of 9psi only as any more the map sensor will shut down the whole system. If you have any Q's or anyhtingt feel free to PM me and im happy to help out. Tristan
__________________
BLUEPOWER RACING DEVELOPMENTS Strive for perfection in everything we do. Take the best that exists and make it better. When it does not exist, design it. Accept nothing nearly right or good enough. -[BLKPHN] (VIC) PLATES FOR SALE $495.00-
|
||||
|
|
|
intake question
Linear Mode
