Welcome to New Members - Post here to say gday! - Page 61

chriscrg1 · 20-05-2012, 10:12 PM

Howdy ford people.
I am new to this site but i hope I can get some good answers.
Cheers
Chris.

XR8fordCHICK · 21-05-2012, 08:58 PM

Hi all im new here was wondering if anyone would help me.I got a BF XR8 sedan ZF 6sp auto i have a top mounted whipple supercharger, what size cams to put in and what band do i use. Any advice would be great.

buddha101 · 22-05-2012, 11:22 AM

Hey. How you doing Everyone, im currently up to my third falcon and thought it was time to upgrade my knowledge and involvment of my favourite car

so here i am.

Hugo Balzac · 22-05-2012, 02:29 PM

Hi All

Sensational forum, really well put together.

I'm on my 4th falcon. I've driven an XW, XB, AU-II, BF-II wagon. I love my BF and looking at ways to mod it. Also my current mid-life crisis is drawing me back to the XW which is special to me as it was my first car.

Cheers.

AU2XR8UTE · 22-05-2012, 03:44 PM

Ive been using this site for a while and after accessing it to help in the removal of an old mobile phone cradle requiring the centre stack / icc facia surround to be removed on my SX TS Territory - which I was quoted $150 to remove and took me 30 minutes- I thought I should introduce myself.

Owned Fords since I started driving in 84. In chronological order:
73 Mark 1 Escort, 77 TD Rally Pack 4.1 Crossflow cast iron, 70 XW Falcon, 77 TE Cortina Wagon, 84 ZK Fairlane Ghia, 90 EA Falcon S, 97 EL Futura, 2001 AU2 Fairmont Ghia, 2001 AU2 Futura and currently:
2001 AU2 XR8 Ute 5 sp manual, original condition 89,000kms and signature motor.
2005 SX TS Territory with Parnell Gas

I have had a dozen or so company cars assigned to me including a BA and FG Falcon.

Next car will probably be my first brand new car purchase as Im so impressed with the Ford Ranger Wildtrak.

Natap · 22-05-2012, 07:19 PM

Hi all
My name is Rhys and just bought my 3rd new xr6 fg mkII
I'm loving the fgs and just had it lowered and a set of 20's on it,getting exhaust done tomorrow only cat back for now.
Look forward to chatting with a few here or many.

38cku · 22-05-2012, 07:46 PM

Gidday fellow Henry owners.
I have a ED with a 5.6L Tickford windsor stroker living in it.
I need to source a set of plug leads with heat shield caps on the plug end.
The thing has the coil packs up front with clip on lead caps.
The existing leads are Bougicord Class F, unfortunately #2 has been damaged.
Can anyone put me in the right direction.
I googled Bougicord, got there website, tracked their Aussie rep (some mob over in WA) only to be told they have none.
Any help appreciated. Feel free to call me.
Steve Cluney .. Keymasters On-Site Locksmiths
Mackay Qld. 0400 236 835

copvan · 22-05-2012, 08:37 PM

G'day fellow ford fans,
i was hoping anyone out there in cyber world could help me, pleeeeeease, where could i find stripes/decals information regardind xc/xd panelvan sundowners?, im looking at turning my xh panelvan into a late 70's early 80s retro icon, your help in this subject would be greatly appreciated, keep on fording!

Slash04 · 23-05-2012, 10:38 AM

Hi All,

I have a BA Series 2 XL Egas ute. Thanks to Members postings of info and experiences, I was able to get all of my problems sorted out. It seems that just about every problem I had is apparently "usual" for BA Fords??

Power steering leaks, disc rotor warpage, diff problems, Gas solenoids cracking. The ute usually goes to a Ford Dealer for servicing as I use it for my business. They quoted nearly 3 times more to do the repairs as what was quoted by independants. . After doing some online shopping and making a few calls, all were fixed for under $2k and I found out some interesting information about the car. With the diff noises, apparently, its very common on Utes and vans that are carrying heavy loads. It seems that the bearing collar slides down the axle which causes the axle bearing to hammer itself into destruction. I was told by a few people that if you let these diffs keep clunking and grinding away, the diff will self destruct causing BIG $$ damage. It cost me just over $450 to get 2 new bearing kits and collars fited and a diff oil change. Diff is sweet as now. WA Diff Centre in O,Connor put the kits in and fitted decent sized non-genuine collars which dont move.

Thanks again Guys for the info.

pursuit57 · 23-05-2012, 10:50 AM

Hi all,

New to the forum and looking forward to be involved.

After owning several Fords over last 20yrs have traded my 2001 AUII Tickford Pursuit Ute that I bought new - waiting for my new FG MKII XR6 Ute !

Hope it gives me as much enjoyment & reliability as the Tickford...

Cheers..
Ray

L_Greenaway · 23-05-2012, 01:53 PM

Hi all, I'm new here. I don't have any pics of my cars as of yet, but will get around to it. I am driving a 99 Fairlane Ghia, full leather and all the bells and whistles. I also have a BA XR6 (Non turbo) that I have broken two rear wheel studs off of. Still haven't gotten around to fix. May need help guys as I've tried but didn't manage to seperate the hub to fit new studs in, seems to be seized together. Any help would be appreciated. Cheers guys... Mark

sirmickle · 23-05-2012, 06:37 PM

Hi everyone, just saying hello from Melbourne. new to this site and hope to be able to take part in these forums.

Michael

Mr_Meaner · 23-05-2012, 06:54 PM

Hi everyone, Grant from Ballarat here.

I recently picked up my first ever Ford, an XR50th in lightning strike. Non turbo, and ZF gearbox.

It's completely stock, so there's no point posting photos of it!

In the 300 or so kms I've done so far, I'm loving it

gtcortina69 · 23-05-2012, 08:51 PM

Hi all, my names mark and my rides are, my daily 1969 mk2 gt cortina
I've also got a xb gs ute which is undertaking a full resto and is almost finished!

sotrod65 · 23-05-2012, 10:10 PM

hi all, happy to be a part of this great site. I have owned a white XM 4 door for over 10yrs which i have worked on over the years, 250 xflow alloy head and xp fairmont disc front which has served me well and almond leather retrim of my front beach seat. Now its time to finally clean her up on the outside. So, whilst the 250 is out to clean and respray engine bay matte black, I thought I want to put a V8 in next, so I bought a 302 from an EB XR8, now I'm selling the 250 and BORG 3speed auto and want to reco the 302, alloy heads manifold and 600cfm carb, extractors with dual exhaust and 9 inch diff, also want to convert my front 4 stud hubs. I've lowered front end and will lower rear. Front guards are off and brakes upgrading cylinder and mounting booster in wheel arch..lots of work ahead of me..love my Falcon.

Let the fun begin!

Would be interested in hearing from anyone that can help.
Cheers

AStibbs · 24-05-2012, 12:05 PM

hey guys, i used to be a member on here, but forgot all my details, etc so started again. I got a bf mk2, had it for a couple of years and i have owned it since i got my license... cant wait to get the mods going now i have full time work

octan3 · 24-05-2012, 07:27 PM

Hi guys,

long time reader and first time posting.
Just want to say thanks for all the info i have taken from this site it has been a huge help!

I now have a problem, i performed the illuminated window switch mod (I_Con) and my single switches work fine but the master unit wont light.
I have checked and double checked my soldering and orientation of leds but am at a loss as to why it wont work.

I have used this type of smd led: http://www.fordforums.com.au/vbporta...article&id=321

does the master need resistors as well due to this led being used?
what am i missing?

thanks for any help

Chris

321ajm123 · 24-05-2012, 07:41 PM

Hi all i joined today. Have a G6ET. Just looking around for ideas on how to change the diff to an LSD. Live in western Sydney. Any good places you know of.
Thanks
Alex

Benjifpv · 24-05-2012, 08:36 PM

Yatzee, benji here, Im from mandurah, work and practicaly live at lane ford, im a detailer if anyone wants cheap but very very high class work done, paint protection and polishing, im an FPV owner I love f6s GT-Ps and gs's yeah boy

bulloved · 24-05-2012, 09:22 PM

Hi New here.
Look all I want to say is that who out there needs a TX5 Ghia for spares etc.Recently fitted: timing belt/starter motor/water pump/fuel pump/coil/leads/plugs/drive belts/rear muffler/2 tyres.
I have AX 1994 2 litre looking for a good home. More details e-mail me.
Martin

Nick46 · 24-05-2012, 09:30 PM

Hi all, I'm Nick and I live in Adelaide. I've got an all ford garage, wq zetec fiesta as daily transport, my grandfathers xf which has been in the family since day one,with an original 80,000km on the clock but with a very unoriginal injected 5.0lt backed with a T5 and LSD, purely a sunny Sunday ride. And my latest toy an FG mk2 FPV GS ute which I picked up brand spankers two days before Christmas. First mk2 on the rd in Adelaide at the time.

bulloved · 24-05-2012, 09:33 PM

Had XF Wagon the best car we have ever owned!!

Geez Louise · 24-05-2012, 09:43 PM

Welcome to the forums everyone.
Great to see so many posts. Always great to see some introductions from new members.

Looking for an answer to a question and not sure how or where to start looking? The forum has a great search function that will pull up every thread that has ever been created, based on any search word you enter. The search button is located on the top navigation bar.

Also, check out the Technical Resources Portal. You will find informationi n there, you would never have thought even existed on the web

Cheers
Col

sammy123 · 24-05-2012, 10:34 PM

Hey guys my name is Sam, 20 yrs old and live in Melb.Currently own a BA XR6 Blueprint colour, stock as a rock for now, future plans is the usual, lowering, rims, performance up grades as an exhaust and intake. Now currently installing an aftermarket headunit also connecting up a sub and amp, should be fun taking out the dash haha

Sam

Bearclan · 25-05-2012, 12:04 AM

Hi Guys,

My name is Chris. I have owned many Fords and worked on many more as a Spray Painter/Panel Beater for too many years to remember.

My current Ride is a 50th Anniversary G6E - Seduce, Love it.

I have just bought my son an AU 'S' which is great as a first car all the safety features without the price tag.

I have been a member and enjoyed reading some useful information and thought it was about time I joined the fray.

Cheers

Shannae · 25-05-2012, 10:38 AM

I'm shannae I just recently got a white series 3 ford falcon au forte,

I will post pics soon so I can get advice on how I can make it look even better but as of right now it is in emaculant shape there is no noticeable dings or scratches and it has been recently detailed.

Themighty1 · 25-05-2012, 10:50 AM

Hello, this is my first post and I have joined this forum because I'm totally a Ford fan. My current cars are a XY Falcon 4x4 and a 1948 Mercury Ute. Non Fords are a 92 Brumby and a 2011 Grand Vitara 3 door

zel0001 · 25-05-2012, 01:56 PM

hey my names Siobhan im looking for a 90's model ford either xg or xf ute to buy will spend up to 1300. if anyone has got one for sale let me know wanting to do it up so doesnt have to be in best condition but in good shape would be better

Markfpvf6 · 26-05-2012, 10:34 AM

Greetings I have known about the site for a while but not being that good with a computer I never looked but a while ago the CD player in my car jammed so it was time to sign up.it was alot easier than I thought.
My first car a XY Wagon with a 302 also having owned a XT GT a XW GTHO (Windsor or phase 1) several ZC & ZD Fairlanes and several other variants over the years. I currently own a 2007 Mk11 F6 Typhoon and a 1979 F100 4WD with a 351 engine.....cheers

Ruination · 26-05-2012, 12:20 PM

G'day all, I am Jace. I am a Kalgoorlie boy now residing in Perth. 21 in 3 weeks (time flies!)
I have always stayed true to blue!

I currently own a MK2 BA XL SE ute in merc seilver with a 5spd manual.

I hope to follow Ford just like my father has over the years and I think this forum may be the place to start my endeavour of doing up/building ford powered dreams, starting with my Ute.

Over the years my father has owned some very prestigious cars, from a few late model Cortinas, an extremely well done XP Panel Van with a 302 windsor to a MK2 Escort RS lookalike, and now he currently built and owns an AC Cobra with a 347 stroked Windsor.

After being around over the years for a few of the builds, mainly the Cobra it has really inspired me to follow in his steps.
Hopefully over years I can produce a few head turners and in general have a ton of fun with my Falcon!