|
30-03-2006, 03:14 AM | #1 | ||
Starter Motor
Join Date: Oct 2005
Posts: 23
|
I have to change the main headlamp globe on my AU2. Various handbooks say
pull the electrical plug whilst others say squeeze the sides of the plug and then pull. Being 500 years old, I do not seem to have the strength to squeeze and pull at the same time. Which is right? Russell |
||
30-03-2006, 04:37 AM | #2 | ||
they call me Tibbo
Join Date: Dec 2004
Location: Brisbane
Posts: 6,163
|
YEs, squeeze the tabs (at 3 and 9 o'clock) and then pull the connector off.. If you are really stuck or the connector is being stubborn undo the earth retainer clip and lift the bulb out where you can see it.. Sometimes you need to wedge a little flatblade screwdriver in between the bulb to level it out..
__________________
|
||