Install of a part.

The Monty · 06-03-2006, 06:46 PM

Ok, does any one know how to instal the hinge on the Centre consol for the lid part. The part No. is AU F060A80 A8 if that helps. I can get one pin in but the other side is impossible. Any help on this would be excelent.
Cheers,
Josh

Racecraft · 06-03-2006, 07:37 PM

undo all the phillips head screws that actually hold the padded cover onto the lid,, then put the hinge into place and add the pins from behind

GK · 06-03-2006, 08:26 PM

Quote:

Originally Posted by The Monty

Ok, does any one know how to instal the hinge on the Centre consol for the lid part. The part No. is AU F060A80 A8 if that helps. I can get one pin in but the other side is impossible. Any help on this would be excelent.
Cheers,
Josh

My hinge has given up the ghost also. How much did the part cost from Ford? The hinge is black right, held in place with 2 phillips head screws?

GK

The Monty · 06-03-2006, 08:30 PM

$19.25 from Ford. You can have it in any colour as long it is in black. Part Number is AU F060A80 A8. Hope this helps. And thanks Tibbo for that. Will give it a go.
Edit. Its all done. Damn what a mission. Thanks for your help Tibbo.

antilooped · 07-03-2006, 12:53 AM

by the way, what dealer was that from? certain dealers *thinks coffee ford* are vultures and charge 20% more

The Monty · 07-03-2006, 08:23 AM

The one at Springwood up here in Brisbane. I think its Q-Ford. The guy there usually cuts a couple of dollars off those prices for me too, good bloke.