|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
30-05-2015, 10:39 PM
|
#1 | ||
|
Starter Motor
Join Date: Nov 2007
Posts: 13
|
Hi every one i need some help with my falcon
Im getting a really rough idle i stumbled upon this post How U going? I'm an ex ford mechanic and have worked on ****loads of AUs with rough idle.. Here is a typical fix au idle list( need access to NGS or WDS diagnostic systems) Check IAC % is 30-35%..base idle screw is adj to obtain IAC %. Check and adjust TPS to voltage reading of 0.7v. check pcm for updates. now my IAC% goes down to 0% and when i disconect the IAC nothing changes is this normal? and to adjust it do u use the black knob or the screw on the throttle stop? here is a youtube vid i took what do you guys think https://www.youtube.com/watch?v=5xVlXxl9sLw |
||
|
|
|
30-05-2015, 11:57 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Apr 2005
Location: Geelong, VIC
Posts: 5,265
|
From the video, your car matches up with the post. IAC% 30-35% and TPS 0.7v.
|
||
|
|
|
|
02-06-2015, 10:49 AM
|
#3 | |||
|
Starter Motor
Join Date: Nov 2007
Posts: 13
|
Quote:
|
|||
|
|
|
|
02-06-2015, 01:21 PM
|
#4 | ||
|
Flairs - Truckers Delight
Join Date: Aug 2006
Location: Brisbane Northside Likes: Opposite Lock
Posts: 5,731
|
is it petrol or gas?
i know the gas cars would do this when they'd get a leaky diaphragm. stick your hand down the cold air intake (before the airbox) and see if it improves. My memory it was getting too much air in the mix or something like that?
__________________
Current: Silhouette Black 2007 SY Ford Territory TX RWD 7-seater "Black Banger"
2006-2016: Regency Red 2000 AUII Ford Falcon Forte Automatic Sedan Tickford LPG "Millennium Falcon" |
||
|
|
|
|
02-06-2015, 06:43 PM
|
#5 | ||
|
FF.Com.Au Hardcore
Join Date: Apr 2005
Location: Geelong, VIC
Posts: 5,265
|
PCV valve broken faulty?
|
||
|
|
|
|
06-06-2015, 02:40 PM
|
#6 | ||
|
Starter Motor
Join Date: Nov 2007
Posts: 13
|
Its on petrol only, dont know if the pcv is faulty does anyone know how to test it
|
||
|
|
|
having problems with idle with video
Linear Mode
