|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
07-10-2012, 01:54 AM
|
#1 | ||
|
[AUT-747]
Join Date: May 2010
Posts: 595
|
Hey,
So I've got a dual sub setup in my boot and when I power up the system I get a massive load of boot vibration. Now I've got the numberplate done, when I press on the boot garnish, pushing towards the car the boot rattle goes away. Besides dynamat which I already know is a remedy. What else could be recommended to get rid of majority of the vibration? Cheers, Alex |
||
|
|
|
07-10-2012, 04:18 AM
|
#2 | ||
|
Rob
Join Date: Jan 2010
Location: VN Capital
Posts: 1,584
|
expandable foam stuff.
my mate has duel subs in his ef that shake the entire shed, expandable foam, dynamat, and a boot carpet thing see's virtually no vibrations.
__________________
99 liquid silver AU Classic -Sold
Supercharged Nissan 350z 280rwkw Blueprint series 3 AU V8 manual |
||
|
|
|
|
07-10-2012, 04:40 PM
|
#3 | ||
|
[AUT-747]
Join Date: May 2010
Posts: 595
|
Where abouts do you spray the foam into? and dynamat all over the boot yea?
|
||
|
|
|
|
07-10-2012, 06:27 PM
|
#4 | ||
|
Rob
Join Date: Jan 2010
Location: VN Capital
Posts: 1,584
|
the gaps between the metal, should be able to see where the holes are and all that, then cover with dynamat, the whole boot lid, then put a carpet over it.
Be sure you figure out how the carpet goes on before you foam it and dynamat it. Start spraying the foam as far down as you can, then work your way up. Iv personally never used the stuff so thats about as much info as i can give ya. But it works well.
__________________
99 liquid silver AU Classic -Sold
Supercharged Nissan 350z 280rwkw Blueprint series 3 AU V8 manual |
||
|
|
|
|
14-10-2012, 10:24 PM
|
#5 | ||
|
Starter Motor
Join Date: May 2010
Posts: 15
|
be very careful using the expanding foam around the boot garnrish/boot lock as it can jam up the lock and ya boot wont open(from experiance)
also be careful of over spray with the foam as it stick like hell to anything and everything. jaycar sell sound deadener for about 30 bucks a roll and it works exacly the same as the dynomat. |
||
|
|
|
AU Falcon Boot Rattle
Linear Mode
