![]() |
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 | ||
FF.Com.Au Hardcore
Join Date: Dec 2004
Location: Brisbane
Posts: 976
|
i have noticed recently that i have about a mil or two freeplay in the steering wheel, i thought it was the uni joint to rack or maybe the rack itself. however i have now noticed that after about 10 min driving the free play goes away, i mean if i move the wheel the slightest bit i can feel it move the wheels. where as in the first 10 min i can feel nothing a mil either way.
thoughts?
__________________
2018 Mustang GT |
||
![]() |
![]() ![]() |
![]() |
#2 | ||
FF.Com.Au Hardcore
Join Date: Feb 2005
Location: Melb north
Posts: 12,025
|
maybe once the rack warms up the metal expands takeing the clearance away from the problem area, 1 mm is`nt very much, if it was mine and i was worried about it, i would probably try the adjustment on the back of the rack, theres a lock nut and hex head if i remember correctly, it just holds the rack rod against the pinion, i put a texta mark on mine for a reference so if i do it too tight and it starts to bind i can put it back the way it was.
|
||
![]() |
![]() ![]() |
![]() |
#3 | ||
Irregular member
Join Date: Dec 2004
Location: Melbourne
Posts: 3,941
|
There was a steering rack recall for the AU some years ago. Could this be related? Did yours get done? I believed they welded something on the rack.
__________________
2000 AU II FAIRLANE 75th ANNIVERSARY - big and shiny My hovercraft is full of eels! Movie Car Chase of the Week: Gene Hackman driving a 1971 Pontiac LeMans to chase an elevated train in The French Connection (1971). |
||
![]() |
![]() ![]() |
![]() |
#4 | ||
Flairs - Truckers Delight
Join Date: Aug 2006
Location: Brisbane Northside Likes: Opposite Lock
Posts: 5,731
|
the rack recall was just for the bolts that tie the rack to the crossmember, just every time you do an oilchange swing off the bolts, you'll be fine.
the ford fix was to put a dab of weld on the end of the thread so the rack didn't completely fall off. hopeless, i know.
__________________
Current: Silhouette Black 2007 SY Ford Territory TX RWD 7-seater "Black Banger"
2006-2016: Regency Red 2000 AUII Ford Falcon Forte Automatic Sedan Tickford LPG "Millennium Falcon" |
||
![]() |
![]() ![]() |
![]() |
#5 | ||
Donating Member
![]() Join Date: Dec 2006
Posts: 5,510
|
The steering shafts used to go on the cabs at about 300000km
Check the uni joints Option 2 is tighten the adjuster nut a bit Option 3 is stuffed tie rods Option 4 is stuffed rack At 10 years old it is probably a combination of all of them |
||
![]() |
![]() ![]() |