|
20-05-2007, 04:10 PM | #1 | ||
Starter Motor
Join Date: May 2007
Posts: 14
|
can anyone tell me if my clutch is on its way out , have a 92 telstar when i release the clutch the car seems to shutter shake, to stop it doing that i have to give it more revs , thanks in advance
|
||
20-05-2007, 09:11 PM | #2 | ||
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
thats the pressure plate on its way out
so do it before you stop in the middle of a highway needing a tow end up with an expensive repair bill every clutch place machines the flywheel as well so allow for that expense on top of the clutch fitting
__________________
My car goes Brumm Brumm |
||
21-05-2007, 11:22 AM | #3 | ||
Starter Motor
Join Date: May 2007
Posts: 14
|
so your saying i just go to my mechanic and tell him to machine the flywheel?
|
||
21-05-2007, 02:14 PM | #4 | ||
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
yes if you intend to replace clutch pressure plate and throw out bearing
no need to do double te work or make your mechanic rich
__________________
My car goes Brumm Brumm |
||