|
|
The Pub For General Automotive Related Talk |
|
Thread Tools | Display Modes |
|
31-05-2020, 01:26 AM | #1 | ||
Regular Member
Join Date: May 2014
Posts: 144
|
FGX
The driver's side wiper arm failed at the base at the connecting nut when the passenger side wiper at around 70,000 kms. T minus 2, on the second last day prior to failure the angle of sweep extended over the A pillar. T minus 1, on the last day prior to failure the driver's side wiper arm barely moved from the original resting position when activated. Despite having a subscription to the Haynes manual I didn't have much anything beyond basic tools to fix it entirely by myself. So I took it to a mechanic and surprisingly after $40 it was fixed. I would have had to spend more purchasing a brand new socket set or thought I would need to pay for more parts like a replacement linkage mechanism if I didn't have a mechanic's second opinion.
__________________
FGX Falcon XR6 Turbo |
||
31-05-2020, 03:01 AM | #2 | ||
Regular Member
Join Date: May 2014
Posts: 144
|
Bugger I couldn't edit my original post in time and I should know better than post so late at midnight:
__________________
FGX Falcon XR6 Turbo |
||
31-05-2020, 08:37 AM | #3 | ||
SZ II TS Territory-Black
Join Date: Nov 2009
Location: Townsville
Posts: 207
|
I had a 2009 Territory for 6 years and my current car is a 2015 Territory. I have not had this issue, maybe because each time I wash my car I put Armor All on the wiper arms?
__________________
Kick it in the guts Barry! FWD is the Devils work |
||
This user likes this post: |
03-06-2020, 02:27 AM | #4 | ||
Regular Member
Join Date: Dec 2005
Location: Perth WA
Posts: 387
|
Finally got around to refurbishing my 2016 Territory wiper arms, as I had to remove them anyway for a wiper motor problem. (Full description of that in SZ Territory forum "sticky").
Would have preferred Wattyl Killrust paint, but for weekend urgency and convenience I chose White Knight Epoxy Enamel and the correct Etch Primer as a reasonable alternative. I am expecting it to last at least as long as the original coating. Also would have preferred satin finish, but could only get flat black - looks OK. Looks good and I am happy with the job. Photo Album: https://photos.app.goo.gl/zdJVnfujSJqN4EUZA (Click on photos to enlarge and read descriptions) Cheers.
__________________
1967 XR 289 V8 Falcon (1st) - 1973 XLE 250 4spd Cortina (2nd) 1987 XF GL 4.1 Dual-Fuel Falcon (3rd) - 1996 EF 4.0 GLI Falcon (4th) 2003 BA 4.0 LPG Falcon Wagon (5th) 2016 SZ Territory TX 4.0 Petrol (6th & last?)(Sadly, written off) 2004 WRX (Retirement Toy) |
||
Thread Tools | |
Display Modes | |
|