|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
|
|
Thread Tools | Display Modes |
12-01-2013, 02:19 PM
|
#1 | ||
|
Starter Motor
Join Date: Jan 2013
Posts: 2
|
Hey guys i have this 2.0l pinto for my MK2 cortina, now its ment to have a aftermarket cam and few other things done to the motor but not 100% sure.
now i cant figer out the timing got crank at TDC cam on its mark, the dizzy was way off its mark so turned the dizzy till it lined up with its mark at lead 1. now the book says to set ign to 6 degrees BTDC so i did that and wont fire. worked my way up to 16 degrees BTDC now but still wont fire. i know the motor works cos had it started when i first got it but would die after a couple secs was told it was cos the timing is out. also would i need to advance my cam if its aftermarket? |
||
|
|
2.0l pinto timing help
Threaded Mode