Quote:
Originally Posted by JasonACT
the code error goes away once Forscan has programmed it correctly. It remains properly paired until it's unplugged from the battery again.
|
Hi, that can't be right. If an FG
ICC is coded in correctly you can remove the battery as long as you like, and when re-applying power it will be operational again. (Except for the risk of power spikes or what else causes the screen failure for MK2).
The security codes must be written to a memory chip that is not battery dependent. (It's not like a VZ Commodore where you had to enter the radio code again).
Anyway, I haven't studied the details to find out if it is the
ICC that compares with a code sent from the
BCM, or if it is the
BCM that compares with a code sent from the
ICC?
Cheers,