Re: how to program a new au keyless remote
|
|
My first post, so take it gentle
Programming Ford AU2 Ute Remotes
This is how I succeeded. Using and combining all I could find on the net
Disconnect battery and leave overnight, 1-2 hours could be ok
Connect battery
The SECRET. Ute interior light must be working and the light switch in the position that switches the light on when the door is opened ????? Ask MR Ford. This was the step that stuffed me and is needed to go into learning mode.
1. Then sit in car with door closed ,open and close the door, interior light will come on.
2. Turn the ignition to the ACC position and press the rear demist button 3 times, within 5 seconds.
3. You then press a button on the first remote to be trained , the door locks will cycle.
4. Then press a button on the 2nd to be trained and the door locks will cycle again.
5. Repeat this step for the the rest of the remotes to be trained to the car.
6. The first keypad trained will result in one door lock cycle, the second will result in 2 door lock cycles, and so on.
CHEERS
BILL J
|