Thanks for the info. Here is some feedback:
I recently changed the Auto oil & filter. A bugger of a job as I had to undo the engine mounts so that I could get enough room to remove the oil pan so I could change the filter. The maunual says you only need a lever to raise the engine???
I also tried to adjust the band (** is this the one your talking about? **) while the pan was out, to the spec of 11 Nm, but it was too hard to undo the lock nut, so I left it. Spewing about this!!!
I have also removed the control unit a while a go so I could put some LED's on the gear change leads that go to auto, but could not make sense of the LED indications. So the battery was disconnected for a long time anyway. A big long reset.
Any other advice I can use as a do it yourselfer or questions I should ask an Auto specialist to make sure they know enough about this type of auto before they dive into it?
|